Lifepo4 105Ah 3.2V Prismatic Battery Cell 3500 Cycle for Boats Electric Vehicles ESS

High-power LiFePO4 (lithium iron phosphate) batteries for electric vehicles and energy storage systems, with the capacity of LiFePO4 batteries, with excellent performance, high stability and long life. The battery can be widely used in energy storage systems, EV, UPS, etc.

3.2V 105Ah continuous 3C discharge The square lithium iron phosphate battery is an aluminum shell battery with good heat dissipation performance, which is a good choice for equipment with temperature control system. 3.2V 105Ah continuous 3C discharge The positive and negative poles of the square lithium iron phosphate battery are designed with screw holes, which is very convenient for assembly and disassembly, eliminating many inconveniences in assembly and disassembly, improving efficiency and saving time.

Key Features:

1. The battery pack is safe, high temperature resistant, and has a long cycle life.
2. Intelligent factory design, high performance consistency;
3. Square aluminum shell structure, and high-precision explosion-proof valve, high safety performance;
4. Low internal resistance, high discharge rate and stable discharge platform;
5. Design and customize according to customer requirements;
6. Long cycle life, the capacity retention ratio exceeds 80% after 3500 cycle at 1C/1C;
7. Green, the product conforms to GB, UN and ROHS directive.

Parameters:

Test Conditions:
1. Test Environmental conditions
Temperature: (25±2)℃
Relative Humidity: 15%~85%
Atmospheric Pressure: 86KPa~106KPa

2. Standard charge
The standard charge means charging the cell with charge current 0.5CA and sonstant voltage 3.65V at(25±2)℃, 0.05C cut off.

3. Standard Discharge
The standard discharge means discharging the cell with discharge current 0.5CA and cut off voltage 2.5V at (25±2)℃. If required, the battery can be discharged at 1.0CA constat current to a cutoff volatge of 2.5V.

Dimensions:

Applications:

Precautions:

1. When charging and discharging the battery, ensure that the battery voltage, current and temperature are monitored and protected.
2. Keep the battery away from heat sources, fire sources, and other corrosive environments such as heat and strong acids and alkalis.
3. Do not short the battery or install it with incorrect polarity at any time
4. Do not mix batteries of different models or different manufacturers.
5. Do not use external force to drop, impact or puncture the battery, do not disassemble the battery or change the external structure
6. When the battery is not used for a long time, please keep the battery charge at 30% ～ 50% SOC, and avoid direct sunlight or high temperature and high humidity environment.
7. When operating the battery, you need to wear protective equipment such as rubber gloves
8. If the battery leaks, smokes or is damaged, please stop using it immediately and contact us.